Description:

A perfect helicopter for getting started with the world of helicopter flying. Thanks to its self -stable flight properties, this great model is perfect for switching from coaxial to singleblade helis. The AFX4 is delivered with the common fashion 2 (gas left) occupancy, so that the vast majority of pilots do not need to change. At the push of a button (see instructions), the model can also be converted to Mode 1. Due to the integrated 6-axis gyro and due to the boundary of the servos, the model can be checked very well and enables a very stable floating flight. In addition, the model is self -stabilizing (similar to a coaxial model). The radio remote control has an additional button to bring the helicopter back into a stable starting point (floating mode). The nick and rolling movements (before/back, right/left) are regulated in such a way that they do not make a prospective pilot with no greater difficulties. If a little more power is necessary, e.g. outdoor with stronger wind, a dual rates of rates on the station ensures more servo path than support. With a little practice to move very smoothly and quickly, this helicopter is wonderfully suitable as a training model for smaller rooms or halls. The flight time varies between 12 - 15 minutes depending on the environment.

Features:

6-axis gyro

Car start / landing

Mode 2 and Mode 1 (selectable via transmitter)

Electronic stabilization

Float stabilization at the push of a button

Very quiet

Very good floating properties

To fly independently and are therefore particularly suitable for beginners

Technical specifications:

Length: approx. 268mm

Diameter main rotor: approx. 249mm

Width (runners): approx. 50mm

Width (cockpit): approx. 38mm

Height: approx. 80mm

Weight including battery 51g

Battery: Lipo 3.7V 350mAh, 10g, 37 x 19 x 8 mm, 25c

USB charging cable output 500mAh

Flight time: approx. 12-15 min.

Scope of delivery:

AFX 4 XP Single rotor helicopter

Remote control, 2.4GHz, Mode 2

Lipo battery

USB charging cable output 500mAh

Hobby

Connecting clamp

Replacement rear rotor blade

Replacement main rotor blades

screwdriver

Operating instructions (German / English)

Required accessories:

6 x 1.5V Mignon AA batteries for the transmitter.