DATA SHEET

Sizes: 35 x 24 x 6mm

Weight (gr): 15 gr

Connection: JR / Graupner / Futaba

MORE INFO

JP Hobby Electrical Magnetic Brake Controller V2

Description

Electrical Magnetic Brake Controller - For RJP Hobby magnetic brake systems. This is the same controller that is included with JP Hobby Electric Wheel and Brake Sets.

JP E-Brake Using illustration

Voltage input : 2S-6S Can tap directly on aircraft batteries Or use an external battery 2S-6S.

Voltage output: 6-10V.

Signal input: Connect the module on your receiver on a 2 switch channel.

The braking force is controlled by the servo travel/endpoints you set in your TX.

You can setthe percentage on the transmitter to control the brake force. +/-100% (or higher percentage if your radio allows for instance +/-140%) for max brake force. Or change setting percentage lower to reduce the braking power and soften the force but always start with the maximum value.

Specifications

Input：7.4v~26v (2~6S lipo)

Output Voltage: 6~10V

Size: 35 x 24 x 6mm

Weight: 15g