1)Microprocessor controlled

2)Extremely low resistance

3)65A continous(85A surge)

4)Up to 14 cells NiMH/NiCad or 2~4 cell Lithium-polymer

5)High rate adjustable switching (PWM:8KHz/12KHz/16KHz)

6)BEC:3A

7)Support 3~4 micro servos

8)Programmable low voltage cutoff

9)Programmable cutoff types(soft cutoff/hard cutoff)

10)Programmable brake type(disable/soft brake/hard brake)

11)Time advance programmable (low/standard/high)

12)Programmable current limiting(very sensitive/standard/insensitive/disable)

13)Governor mode(low rpm governor/high rpm governor)

14)Programmable startup type(very soft start/soft start/fast start)

15)Thermal Protection(100 centigrade)

16)Apply to most of inrunner and outrunner brushless motors.

17)No complex programming, auto adapt work mode.

18)A LED (flashes) indicates the current limiting or temperature protection actived.

19)Runs motor in forward or reverse by swapping any two motor wire connections.

20)Safe “power on” arming program ensures motor will not accidentally turn on.

21)Auto shut down when signal is lost or radio interference becomes severe for more than 3 seconds .After radio connection has been reestablished, moving the throttle to the lowest position can restart the motor.

22)The ESC is disabled when the voltage is over 18V at power-on.

Size: 63mm X 31mm X 10mm

Weight: 48g (with wires)