The PowerBox iGyro™ SRS is a completely new type of gyro system intended
for fixed-wing model aircraft. At the development stage our constant
aim was to com-bine maximum versatility with simplicity of operation.
Features
- Extremely accurate triple-axis MEMS sensor
- Special regulatory algorithm designed for fixed-wing model aircraft
- Menu-based setup assistant
- Three-stage flight phase switching
- Three axes distributed to five servos, each adjustable independently
- GPS-regulated gyro gain
- Integral delta mixer
- Can be installed in any attitude
- Graphic OLED screen with 128 x 64 pixels
- Ultra-simple menu-controlled programming method using the SensorSwitch
- SRS technology for use with various bus systems:
Futaba S-Bus, Spektrum SRXL, DSM2/DSMX, JR DMSS, HoTT, M-Link and Jeti
- Unrestricted channel assignment (channel mapping)
- Digital output can be passed on to an SRS PowerBox system
- 16-bit processor for fast, high-resolution signal processing
- Settings can be stored on a PC and reloaded at any time
- Updateable with PowerBox Systems USB Interface connectors
- Robust aluminium case
|
|
Technical Data
Operating voltage
|
4.0V - 9.0V
|
Current drain Power-on state
|
51mA
|
Current drain, GPS
|
60mA
|
Maximum load current
|
10A
|
Signal input
|
serial
|
Supported RC systems
|
Futaba, Spektrum, JR, Jeti, Graupner, Multiplex
|
Receiver redundancy
|
SRS
|
Servo sockets
|
5
|
Servo signal resolution
|
0,5µs
|
Gyro regulation
|
Heading- and Normalmode
|
Gyro sensor type
|
MEMS
|
Number of sensor axes
|
3
|
Screen
|
OLED 128 x 64 pixels, graphic
|
Dimensions
|
52 x 35 x 14 mm
|
Weight
|
50g, incl. GPS Sensor
|
Temperature range
|
-30°C to +75°C
|
|
|
|
Product description
The
PowerBox iGyro™ SRS is a completely new type of gyro system intended
for fixed-wing model aircraft. At the development stage our constant aim
was to com-bine maximum versatility with simplicity of operation. The
system incorporates a regulatory algorithm specifically developed for
fixed-wing models, which causes hardly any alteration in the model’s
familiar flying characteristics; at the same time the aeroplane flies
much more smoothly and accurately, and is less sensitive to unwanted
weather-induced or aerodynamic influences. The need for mixers, such as
elevator to rudder or flaps, is eliminated entirely. The iGyro™ exploits
the latest servo bus technology to minimise the extremely complex
wiring arrangements necessitated by previous gyro systems.
|
|
The
ability to assign any channel to the gain adjusters makes it possible
to set up the desired gyro effect accurately in just one short flight.
Independent adjustment of each of the five outputs is possible, enabling
the modeller to set up gyro gain and direction of effect precisely. The
separate GPS sensor provides a means of obtaining a constant gyro
effect over the model’s full speed range, effectively eliminating the
problem of over-compensation leading to oscillation in high-speed
flight. In version 16 and later the software include a menu-based setup
assistant which makes it possible to complete all the settings in just a
few minutes.
|
|
|
Operating Instructions (3500_iGyro_en.pdf, 2,047 Kb) [Download]
Add on Manual setup (3500-powerbox-igyro-zusatzanleitung-en.pdf, 1,404 Kb) [Download]