Comprehensive complete package for micro models, shockflyers and small gliders. Due to the built-in gyro stabilization, the set fits small 3D models. For beginners it is also perfectly suited to make the first flight attempts with self-built models. The switchable gyro function supports all flight maneuvers by stabilizing the position and almost hides the effects of the wind. In gyro mode, for example, the model cannot be overdrawn, even when the transmitter stick is fully deflected, climbing, descending and turning is limited to approx. 15 °. If the function is deactivated (via a button on the transmitter), loops or rolls are also possible. An additional button on the transmitter also serves as a rescue function to bring the model from an uncontrollable flight position into a stable, neutral flight position.

We offer a variety of materials to go with this set to build your own plane. From our popular, almost indestructible "Flexifoam" to carbon struts and GRP plates to motors. Throwing gliders, micro foam models such as the Fox glider or other models of this class that are sold without electronics also go perfectly with this set. The conversion is quite simple and can also be carried out without much prior knowledge.

Features:

Complete RTR package mode 2 with transmitter 2.4GHz, 5 channel receiver with gyro and motor control for brushed motors, 2.4Ghz, 2x micro servo + 2x micro servo on the receiver, Y-cable Micro JST, battery 2S LiPo 300mAh JST, USB Charging cable

Gyrofunction 3D / 6G switchable

5 fully proportional channels (throttle, elevation, side, 2x aileron)

Rescue function

Dual rate switchable (high and low, servo travel limitation)

2.4GHz system

approx. 100 - 150m range

Failsafe (e.g. if the range is exceeded)

LiPo Safe shutdown soft (reduces the performance when the battery is weak)

Technical specifications:

Transmitter: 2.4GHz 6 channel

Dimensions of the receiver board LxWxH: 32 x 25 x 18mm

Weight: 10g

Motor connection: for brushed motors with Micro JST connector 2-pin

Dimensions extra servo LxWxH: 11 x 15 x 3mm

Weight: 2g

Positioning force approx. 150g

Battery: 300mAh 2S 7.4V LxWxH: 40 x 14 x 10mm

Weight: 16g

Scope of delivery:

2.4GHz transmitter

Receiver including gyro and 2 micro servos

2x extra micro servo

Y-cable micro JST

Battery LiPo 300mAh 2S 7.4V JST

USB charging cable

Is still needed:

4x Mignon 1.5V batteries for transmitter