Description:

The consistent further development of our popular AF4XP helicopter – thanks to its inherently stable flight characteristics, the AFX4 R3D is wonderfully suited for switching from coaxial to single-blade helicopters. Now with a special feature: At the touch of a button, even light 3D maneuvers such as flips and rolls can be flown. Brought to a safety height of about three meters – indicated by flashing the red status LED on the transmitter – the 3D mode is activated on the transmitter. Briefly steered a direction in which the maneuver should be executed, and the model now performs a roll or flip on its own. Action-packed air shows are thus easy to realize even for beginners.

Due to the integrated 6-axis gyro and the travel limitation of the servos, the helicopter can be controlled more precisely and enables a very stable hovering. In addition, the AFX4 R3D is self-stabilizing, similar to a coaxial model. The radio remote control has an additional button to bring the helicopter back into a stable starting position (hovering mode). The pitching and rolling movements (forward/backward, right/left) are regulated by the manufacturer in such a way that they do not pose any major difficulties for a prospective pilot. If a little more power is needed, e.g. outdoors in stronger winds, a dual-rate switch on the transmitter provides more servo travel than support. With a little practice, the Single Red Helicopter can be moved smoothly and quickly and is wonderfully suited as a training model for smaller rooms or halls.

The AFX4 R3D single-rotor helicopter is delivered with the common Mode 2 assignment (throttle on the left), so that many pilots do not need to make any further adjustments. At the push of a button, the model can also be switched to mode 1. The flight time varies between 12 and 15 minutes, depending on the environment and flight maneuvers.

Highlights: 3D flight manoeuvres at the touch of a button: flips and rolls from a safety height of around 3 metres
Auto-take-off and auto-landing: Particularly beginner-friendly in helicopter flying
Automatic altitude holding:
Simplifies learning individual flight maneuvers

Other features:
RTF version (Ready-to-Fly) incl. remote control, battery, charging cable
6-axis gyro
Mode 2 and Mode 1 (selectable via transmitter)
Electronic stabilization
Hovering stabilization at the touch
of a button Intrinsically stable to fly
Low noise level

Specifications: Fuselage length: 260mm Fuselage width: 50mm Fuselage height: 75mm Rotor diameter: 245mm Main material: Plastic
Weight ready to fly: 55g Remote control: 4-channel 2.4GHz
Range: 50-80m
Servos: 2x Microservo
Battery: LiPo 1S 3.7V 300mAh 25C hard case with built-in charging electronics and plug, 46x20x8mm, 13g

Flight time:
12-15min
Charger: USB cable
Charging time: 60-90min

Scope of delivery:
Model
remote control
battery
charging cable
Accessories Instruction
manual DE/EN

Required accessories:

4x 1.5V AA Mignon batteries