The rush for speed has always driven many model pilots. Combined with a very low weight and a powerful engine, flight performance is now possible that could only be dreamed of a few years ago. Our FOXX is a high-performance model for speed flight. Built entirely of balsa wood, a very high flight performance is achieved with minimal weight. Due to the high speed, this model is suitable for more experienced pilots. The construction of the model is made of lasered wooden parts, mainly balsa wood and reinforcements made of pine spars. FOXX is controlled by two ailerons and elevators. Internal rotors with high speed and a diameter of up to 28mm can be used as motors. Due to the ease of construction, the completion of the model in a weekend is quite feasible. The construction technology is based on the well-known construction method that aero-naut already uses in many models. Conclusively tapped components and the use of a slipway ensure fast and accurate construction success. The model kit contains all components for building the model from wood, linkage parts, Bowden cable and the detailed 3D building instructions.

Recommended drive

• Motor internal rotor Ø28 mm, approx. 2500 kV
• Regler actrocon 60 Order No. 7003/34
• Servo 1 x AN-12-MGBBA Order No. 7003/74
• Servo 2 x AN-10L-MGBBD Order No. 7003/73
• Spinner 38 mm Order No. 7258/01-05
• Propeller coupling depending on the motor shaft Ø
  Motor shaft 3.0 mm Order no. 7124/38
  Motor shaft 3.2 mm Order No. 7124/08
  Motor shaft 4.0 mm Order No. 7124/11
• 3S-LiPo, 2,000 mAh
• Propeller approx. 5 – 6" diameter (please compare recommendations with the engine manufacturer's specifications)