Small, manoeuvrable Delta Jet in a completely new design in the PNP version. The jet is largely prefabricated, the assembly is limited to the assembly of the side tail unit. All servos (3x 8g), the 50mm impeller incl. 4300kV brushless motor and the 20A Hobbywing ESC are already installed. The jet is designed to take 3S Li-Pos between 850 and 1000mAh, with which the Delta Jet achieves remarkable flight performance. The speed ranges from fast to slow and therefore also appeals to less experienced pilots. The maneuverability and the roll rate also convince with a wide range from very agile to tame. The starting behavior is completely uncritical, which means that the model can be started by hand without any problems. The jet shows no tendencies towards the typical sagging of an impeller model. Due to its small size, the model is the perfect trunk plane for in between and is a lot of fun even in a season with several models.

Features:

Fast and manoeuvrable impeller jet in delta design

Quick and easy to set up (PNP)

High quality ESC from Hobbywing with 20A with XT60

Designed for 3S LiPo 11.1V XT60

Nice, easily visible design

Fully aerobatic thanks to the articulated rudder

Technical specifications:

Length: 652mm

Span: approx. 550mm

Weight: approx. 319g without battery

Impeller: 50mm 5 blades

Motor: 4300KV Brushless

ESC: 20A Hobbywing with XT60 connector

Servos: 3x 8.0g

Scope of delivery:

Model including motor, controller, servos, impeller

Screws and articulation parts

Assembly instructions DE / EN

Required accessories:

Sender & receiver at least 4 channels

Battery Li-Po 3S 850 - 1000mAh 11.1V XT60

Charger for Li-Po