The speed controller for brush motors Jeti JES 006 well-known Czech company Jeti Model is an excellent choice for small aircraft powered by a brush electric motor. The small dimensions and low weight, as well as the ease and reliability of service make the Jeti controllers the most popular chip on the market in this segment.

Characteristics:

Dimensions: 18 x 14 x 5 mm
Weight without / with cables: 1.5 / 6 g
Continuous current: 6 A
Current max. 30 sec : 8 A
Supported number of NiCD or NiMH cells: 4 - 8 (4.8 - 9.6 V)
Supported number of LiPol or LiIon cells: 2 - 3 (7.4 - 11.1 V)
For 300, 280 and smaller motors

All Jeti Model JES series regulators are compatible with NiCD, NiMH, LiPol and LiIon batteries. They have special 4 packet handling programs for this purpose, thanks to which the voltage in the batteries is cut off at a safe time guaranteeing their trouble-free use.

Mode 1: Nc / NH / Br.ON: The brake is active, Nikel Cadmium (NiCd) or Nickel-Metal hydride (NiMH) batteries are supported, the voltage is cut at 4V or at least 0.7V per cell in the packet.
Mode 2: Nc / NH / Br.OFF: The brake is switched off, Nikel Cadmium (NiCd) or Nickel-Metal hydride (NiMH) batteries are serviced, the voltage is cut at 4V or at least 0.7V per cell in the packet.
Mode 3: Li / Br.ON: The brake is active. Supported Lithium-Polymer (LiPol) or Li-ion (Li-ion) batteries, voltage cut is at 6V for 2 cells or 9V for 3 cells.
Mode 4: Li / Br.OFF: Brake is off, Supported Lithium-Polymer (LiPol) or Lithium-Ion (LiIon) batteries, voltage cut at 6V for 2 cells or 9V for 3 cells.

Markings on the regulator:

A + (Akku +): Connection to the positive battery terminal (red cable)
A- (Akku -): Connection to the negative battery terminal (black cable)
M + (Motor +): Connection to positive motor buegun
M- (Motor -): Connection to the negative pole of the motor

Warning! Reverse polarity connection A + and A- will result in blown regulator! Reverse polarity connection on the M + and M- motor will result in the reverse direction of the motor.