Description

Super scale replica of a very well-known drift car on a scale of 1:7 with the finest equipment and a top speed of over 100km/h. This top model combines very high-quality components with an extreme drive concept (6S LiPo) and top equipment such as 2x 3S LiPo batteries, a high-quality and precise 2.4GHz remote control, a LiPo charger and many CNC-milled aluminum parts.

For maximum drift behavior, the HC7 is equipped with a handbrake that can be controlled from the transmitter. This allows the vehicle to be placed in the curves as if it were in real life.
The unbridled power of the 4282 brushless motor with a specific speed of 2000KV is sensitively controlled via a 150A controller and distributed to the 4 wheels (4WD) via cardan and CVD drive shafts. The powerful steering servo with metal gear and 15kg actuating force always ensures maximum performance and a very direct response of the steering. The shock towers, wishbone mounts and chassis struts are milled from high-quality aluminum. The chassis plate is also made of solid aluminum.
The main gear and differentials are milled from high-quality steel and guarantee a long service life. To prevent overheating, both the motor and the 150A brushless controller are equipped with fans to counteract the heat generated while driving.
In addition to the perfectly balanced chassis and specially developed tires, the HC7 also has the massive Big Bore oil-pressure shock absorbers.
The beautiful body of the drift car is visually an absolute cream piece, which gives the model a very nice and sporty look. The HC7 is also equipped with an LED lighting system which can not only be switched on and off via the transmitter, but also allows different lighting modes. (different front lighting modes with angel eyes in different colors)

The HC7 sets new standards in the field of RTR RC cars in all respects, whether as a high-speed racer or drift car!

• Solid, torsion-resistant 4mm aluminum chassis - for stable handling
• Front and rear shock towers made of CNC-milled aluminum Double chassis struts made of aluminum High-quality and hardened CVD drive shafts made of steel All transmission parts are CNC-milled from high-quality steel
• Steering knuckles and steering levers made of milled aluminum
• Vehicle with full ball bearings
• The front and rear suspension can be easily and precisely adjusted and optimized for different surfaces.
• Water-resistant receiver box
• Tires with perfect rubber compound for race and drift
• Wishbone mount made of milled aluminum for maximum durability
• Brushless high-performance motor with 2000KV and double fan
• High-performance controller with 150A and XT90 connection 2x 3S LiPo battery with 5000mAh and XT90 connection
• 
  
• Metal gears Servos for steering and handbrake

Technical data:

Scale: 1:7
Length: 765mm

Width: 345mm

Height: 190mm

Weight: approx. 5.5kg
Wheelbase: 413mm

Front track width: 280mm

Rear track width: 300mm

Ground clearance: 25mm

Front wheels: outer diameter/width 109 / 50mm

Rear wheels: outer diameter/width 109 / 50mm

Rim diameter: 84mm
Transmission:Steel

Gear ratio: 8.5:1

Front damper: 92mm Rear damper: 92mm

Brake: electronically via the motor and brake disc over 9kg Metal gear servo controlled

Controller: 150A ESC with XT90 connector

Motor: 4282 Brushless motor with 2000KV

Drive system: Metal

propshaft Steering servo: Standard servo with metal gear and 15kg actuating force

Main Material: Aluminum

Battery compartment dimensions: 140x45x50mm Battery: 2x LiPo, 3S, 11.1V, 5000mAh 35C, Softcase XT90 plug LxWxH: 140x40x25mm

Weight: 350g

Travel time: approx. 10 – 15 min

Maximum speed: up to a maximum of 130km/h (with optional tuning)

Remote control: 4 channel 2.4GHz Remote control

range: max. 400m

Charger: BX3 Balancer Charger 220V

Charging time: approx. 3 – 4 hours per battery

Scope of delivery:
Model
transmitter
2x battery 3S LiPo
LiPo charger
Decal sheet
Instructions DE/EN

Required accessories:

4x 1.5V Mignon AA batteries for the transmitter