The GR-16 receiver can control up to 8 servos
With GRAUPNER HoTT 2.4 GHz technology, the receiver has a new
hopping telemetry transmission high-frequency unit with state-of-the-art
components and the latest software. A hardware antenna diversity system
always switches to the better antenna signal and for transmission
always uses the antenna that was last used for receiving. This ensures
that the returnchannel data is transmitted via the better positioned
antenna. Parameters for receiver supply voltage, receiver temperature
and signal strength are transmitted without any additional sensors.
receivers, it is absolutely essential that you do not carry out
programming work, e.g. with the Smart Box, during a flight, as this
alters the settings in all switched-on receivers and this can lead to
incorrect settings; in the worst-case scenario it could result in the
model crashing! For this reason always carry out programming on the
ground, and check that only the receiver to be programmed at thecurrent
time is powered on.
Functions with SMART-BOX:
Specification
Width [mm]: 21 mm
Height [mm]: 14 mm
Temperature range [°C] : - 15...+70 °C
Aerial length [mm]: 2 x Wire 145 (Antenna 30) mm
All-up weight [g]: 12 g
Frequency : 2400 ... 2483.5 MHz
Range approx. [m] : 4000 m
Overall length [mm]: 46 mm
Dimensions [LxWxH in mm]: 46 x 21 x 14 mm
Modulation: 2.4 GHz FHSS
Current consumption [mA]: 70 mA
Operating voltage neutral [V] : (2,5) 3,6 ... 8,4 V
Channels: 8
Telemetry capable: Yes
Satellite receiver connection: Yes
Number of antennas: 2
Τηλ: 210 5444 204 - Φαξ: 210 5444 384
e-mail: info@diamond-models.gr
Διεύθυνση: Κοραή 8 & Καποδιστρίου
Αιγάλεω 122 41 , Αθήνα
Ώρες Λειτουργίας: Δ-Τ-Τ-Π-Π απο 9:30-20:30 Σαβ.απο 9:30-15:00